a practical guide to the wiring regulations fourth edition pdf
This fourth edition of A Practical Guide to the Wiring Regulations takes account of
the requirements of BS 7671:2008 Requirements for Electrical Installations (IEE Wiring
Regulations Seventeenth Edition).
BS 7671:2008 was issued on 1 January 2008 and came into effect on 1 July 2008.
It replaces BS 7671:2001 (IEE Wiring Regulations Sixteenth Edition) as the national
standard for electrical installation work, and its requirements are to be complied within
all electrical installation work designed after 30 June 2008.
The content of BS 7671:2008 has undergone extensive changes and additions compared
with that of BS 7671:2001. The numbering of the regulations has also been revised to
follow the pattern and corresponding references of International Electrotechnical Commission (IEC) Standard 60364. Account has been taken in BS 7671:2008 of the technical
intent of a significant number of revised and new CENELEC harmonization documents
(HDs). Indeed, of the 28 HDs listed in the preface of BS 7671:2008, 17 are revised compared with the versions used in BS 7671:2001, as finally amended, and seven are newly
introduced to BS 7671.
The revised HDs have led to changes in, amongst other things, the various protective
measures specified in Part 4 of BS 7671 and the requirements for special installations or
locations. Not the least of the changes are those affecting the general requirements for
protection against electric shock, which have been restructured and are subject to new
terminology. Another notable change is that it is now permitted to install general-purpose
socket-outlets in locations containing a bath or shower, provided these outlets are at least
3 m horizontally outside the boundary of zone 1 and the circuit supplying them is provided
with additional protection by an RCD having specified characteristics (as must be all the
circuits of the special location).
The newly introduced HDs have led to the addition of new sections in BS 7671 relating
to: marinas and similar locations; exhibitions, shows and stands; solar photovoltaic power
supply systems; mobile or transportable units; caravans and motor caravans (previously
covered in Section 608 of BS 7671:2001); temporary installations for structures, amusement devices and booths at fairgrounds, amusement parks and circuses; and floor and
ceiling heating systems.
While many changes have been associated with CENELEC HDs, a number of modifications made have been initiated in the United Kingdom. These primarily relate to cables
concealed in walls and/or partitions in installations that are not intended to be under the
supervision of a skilled or instructed person. In many cases, such cables are now required to be provided with additional protection by an RCD having specified characteristics,
unless other specified protective provisions are employed.
In their professional experience the authors of this Guide have been asked, and
attempted to answer, numerous questions over the years relating to the regulatory
requirements and their implementation. While most practitioners will recognise where a
proposed solution will not, or does not, meet the requirements, many find it difficult to
attribute a precise regulation number to the deficiencies they believe to exist or to decide
what action to take in solving the problem. This is not surprising since the subject of
electrical installations is vast and complex.
Those that believe that all issues are crystal
clear (or black and white) and that there is only one possible solution to a design problem
are deluding themselves. As there are many ways of killing a cat (besides electrocution) so
too are there many design and installation options so long as the basic constraints are met.
An attempt has been made in this Guide to make life a little easier and topics are
addressed with the pertinent Regulation numbers listed where appropriate. However, the
Guide will be most useful to those who have at least a working knowledge of earlier
editions of the National Standard. This Guide is not intended for use by the DIY enthusiast
unless, of course, he or she happens to be competent in this field.